Specifications

RFID Commands
^RS
308
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
Supported Tag Types Table 14 shows the tag types supported by different RFID
printers/print engines and firmware versions. Depending on your country or on the firmware
version that you are using, your printer may not support all of the tag types listed. If you
specify an unsupported tag type in the ^RS command, the printer uses the default value. If a
tag type is shown as supported but does not work with your printer, you may need to upgrade
the printer’s firmware (see http://www.zebra.com/firmware).
Table 14 • Supported Tag Types and Default Values
Tag Type
UHF Printers HF Printers
R60.13.X R62.13.X R63.13.X SP920X SP994X, SP999X, SP1027X SP1056X
R110Xi HF R2844-Z R110Xi R170Xi R110PAX4 R4Mplus
UHF Tag Types and Options
None (no tag type specified)
**—— — —
— —
EPC Class 0
**—— — —
— —
EPC Class 0 Plus
**—— — —
— —
EPC Class 1 64-bit
**—* * —
— —
EPC Class 1 96-bit
##—# * —
— —
UCODE EPC 1.19
*a
a. Requires R60.13.0.13ZD or higher.
——— — *
— —
Impinj Class 0 Plus
**—— — —
— —
ISO 18000-06A
—*—— * —
— —
EPC Class 1, Generation 2 (Gen 2)
**—— * #
— —
ISO 18000-06B
**——#—
— —
HF Tag Types and Options
Auto-detect the tag type by querying the tag
———— — —
— #
Tag*It (Texas Instruments Tagit tags)
———— — —
— *
I*code (Phillips Icode tags)
———— — —
— *
Pico Tag (Inside Technology’s)
———— — —
— *
ISO 15693
———— — —
# *
EPC tag
———— — —
— *
UID Tag
———— — —
— —
Mifare UltraLight
———— — —
* —
# = Default value
* = Accepted value