Specifications

ZPL Commands
^SZ
272
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
^SZ
Set ZPL
Description The ^SZ command is used to select the programming language used by the
printer. This command gives you the ability to print labels formatted in both ZPL and ZPL II.
This command remains active until another
^SZ command is sent to the printer or the printer
is turned off.
Format ^SZa
This table identifies the parameters for this format:
Comments If the parameter is missing or invalid, the command is ignored.
Parameters Details
a = ZPL version
Accepted Values:
1 = ZPL
2 = ZPL II
Default Value: 2