Specifications

261
ZPL Commands
^SO
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^SO
Set Offset (for Real-Time Clock)
Description The ^SO command is used to set the secondary and the tertiary offset from the
primary Real-Time Clock.
Format ^SOa,b,c,d,e,f,g
This table identifies the parameters for this format:
Note • For each label only one SO2 command can be used. If more than one offset is
required, SO3 must be used.
Parameters Details
a = clock set
Accepted Values:
2 = secondary
3 = third
Default Value: value must be specified
b = months offset
Accepted Values:
–32000 to 32000
Default Value: 0
c
= days offset
Accepted Values:
–32000 to 32000
Default Value: 0
d
= years offset
Accepted Values:
–32000 to 32000
Default Value: 0
e
= hours offset
Accepted Values:
–32000 to 32000
Default Value: 0
f
= minutes offset
Accepted Values:
–32000 to 32000
Default Value: 0
g
= seconds offset
Accepted Values:
–32000 to 32000
Default Value: 0