Specifications

253
ZPL Commands
^SE
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^SE
Select Encoding
Description The ^SE command is used to select the desired ZPL or ZPL II encoding table.
Format ^SEd:o.x
This table identifies the parameters for this format:
The encoding tables are provided with the font card or downloaded in flash with the font. The
table appears as XXXXXXX.DAT in a directory label printed by the ZPL commands.
The most active encoding table is indicated by the * on the directory label.
Parameters Details
d = location of
encoding table
Accepted Values:
R:, E:, B:, and A:
Default Value: R:
o
= name of
encoding table
Accepted Value:
1 to 8 alphanumeric characters
Default Value: a value must be specified
x = extension
Fixed Value:
.DAT