Specifications

ZPL Commands
~RO
250
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
~RO
Reset Advanced Counter
Description The ~RO command resets the advanced counters used by the printer to monitor
label generation in inches, centimeters, and number of labels. Two resettable counters are
available and can be reset.
Format ~ROc
This table identifies the parameters for this format:
Parameters Details
c = counter number Accepted Values: 1 or 2
Default Value: a value must be specified or the command is
ignored
Example • This is an example of the ~RO command.
Before
After