Specifications

249
ZPL Commands
^PW
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^PW
Print Width
Description The ^PW command allows you set the print width.
Format ^PWa
This table identifies the parameters for this format:
Limitation Not all Zebra printers support the
^PW command.
Parameters Details
a = label width (in
dots)
Accepted Values:
2, to the width of the label
If the value exceeds the width of the label, the width is set to
the label’s maximum size.
Default Value: last permanently saved value