Specifications

ZPL Commands
^PR
246
45541L-004 Rev. A ZPL II Programming Guide 9/15/06
Comments The speed setting for p, s, and b is dependent on the limitations of the printer. If
a particular printer is limited to a rate of 6 ips (inches per second), a value of 12 can be entered
but the printer performs only at a 6 ips rate. See your printer’s User Guide for specifics on
performance.
s = slew speed Accepted Values:
A or 2 = 50.8 mm/sec. (2 inches/sec.)
B or 3 = 76.2 mm/sec. (3 inches/sec.)
C or 4 = 101.6 mm/sec. (4 inches/sec.)
5 = 127 mm/sec. 5 inches/sec.)
D or 6 = 152.4 mm/sec. (6 inches/sec.)
E or 8 = 203.2 mm/sec. (8 inches/sec.)
9 = 220.5 mm/sec. (9 inches/sec.)
10 = 245 mm/sec. (10 inches/sec.)
11 = 269.5 mm/sec. 11 inches/sec.)
12 = 304.8 mm/sec. 12 inches/sec.)
Default Value: D
b = backfeed speed Accepted Values:
A or 2 = 50.8 mm/sec. (2 inches/sec.)
B or 3 = 76.2 mm/sec. (3 inches/sec.)
C or 4 = 101.6 mm/sec. (4 inches/sec.)
5 = 127 mm/sec.(5 inches/sec.)
D or 6 = 152.4 mm/sec. (6 inches/sec.)
E or 8 = 203.2 mm/sec. (8 inches/sec.)
9 = 220.5 mm/sec. 9 inches/sec.)
10 = 245 mm/sec. 10 inches/sec.)
11 = 269.5 mm/sec. 11 inches/sec.)
12 = 304.8 mm/sec. 12 inches/sec.)
Default Value: A
Parameters Details