Specifications

241
ZPL Commands
^PM
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^PM
Printing Mirror Image of Label
Description The ^PM command prints the entire printable area of the label as a mirror
image. This command flips the image from left to right.
Format ^PMa
This table identifies the parameters for this format:
Comments If the parameter is missing or invalid, the command is ignored. Once entered,
the
^PM command remains active until ^PMN is received or the printer is turned off.
Parameters Details
a = print mirror
image of entire
label
Accepted Values:
N = no
Y = yes
Default Value:
N
Example • This is an example of printing a mirror image on a label:
^XA^PMY
^FO100,100
^CFG
^FDMIRROR^FS
^FO100,160
^FDIMAGE^FS
^XZ
ZPL II CODE
GENERATED LABEL