Specifications

235
ZPL Commands
^NI
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^NI
Network ID Number
Description The ^NI command is used to assign a network ID number to the printer. This
must be done before the printer can be used in a network.
Format ^NI###
This table identifies the parameters for this format:
Comments The last network ID number set is the one recognized by the system.
The commands
~NC, ^NI, ~NR, and ~NT are used only with RS-485 printer
communications.
Parameters Details
### = network ID
number assigned
(must be a three-
digit entry)
Accepted Values:
001 to 999
Default Value: 000 (none)