Specifications

211
ZPL Commands
^JZ
9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
^JZ
Reprint After Error
Description The ^JZ command reprints a partially printed label caused by a Ribbon
Out
, Media Out, or Head Open error condition. The label is reprinted as soon as the
error condition is corrected.
This command remains active until another
^JZ command is sent to the printer or the printer
is turned off.
Format ^JZa
This table identifies the parameters for this format:
Comments
^JZ sets the error mode for the printer. If ^JZ changes, only labels printed after
the change are affected.
If the parameter is missing or incorrect, the command is ignored.
Parameters Details
a = reprint after error Accepted Values:
N = no
Y = yes
Initial Value at Power-up:
Y