Specifications

9/15/06 ZPL II Programming Guide 45541L-004 Rev. A
1
Introduction
This guide is the unabridged, alphabetical reference of programming commands supported in
the firmware.
Firmware You can get the printer’s firmware version by printing out a configuration label.
For instructions to do so, see your printer’s user guide.
If you are using a previous version of Zebra printer firmware, some of the commands are the
same and function as they did before— but equally as many are new and are not recognized by
firmware earlier than X.10.
Many word processors or a text editor capable of creating ASCII files can be used to recreate
most examples in this guide. However, for other encodings such as Unicode, a text editor such
as Microsoft Notepad is needed.
If there are any terms used in this guide that you need clarification on, please see the Glossary
on page 379.
Note • Firmware upgrades are available at: www.zebra.com.