User Manual
Table Of Contents
- About This Document
- Contents
- Introduction
- Getting Started
- Print Operations
- Determining Printer Configuration
- Thermal Printing
- Modes of Printing
- Print Media Types
- Replacing Supplies
- Adjusting the Print Width
- Adjusting the Print Quality
- Media Sensing
- Printing on Fan-Fold Media
- Printing with Externally Mounted Roll Media
- Fonts and Your Printer
- Stand Alone Printing
- Sending Files to the Printer
- Print Meter
- EPL Line Mode
- Printer Options
- Control Panel Operation
- Maintenance
- Troubleshooting
- Appendix
Introduction
LCD Display Overview
62
980611-001 Rev. B GX420t / GX430t User Guide 6/4/08
LCD Display Overview
The LCD display for G-Series printers with the Wi-Fi or Bluetooth options provide user
feedback for printer operations, some basic controls for printer functionality, printer display
controls, and wireless connectivity information.
The control panel features three operator controls: the Feed button, the Scroll button and the
Select button. The Feed button is used to advance one label or a pre-set length of continous
media. You can control display operation by using the Scroll and Select buttons. The Scroll
button allows scrolling through the various options and settings. The Select button allows
selection of the option or function displayed on the screen.
When the number of selections are too numerous to be displayed on one screen, MORE will be
listed at the bottom of the display. To access the additional selections, use the Scroll button to
move down through the current screen and the display will list the next set of choices.
100
OOO OO
OOOOOOOOMENU
PRINTER READY
Wireless Connecton
Status Messages
Scroll Button
Select Button
Feed Button
Printer Status and
Alert Messages
Note • While the control panel can be used to change some printer settings, many settings
can only be changed using Set / Get / Do (SGD) commands. Refer to the ZPL II
Programming Guide for information on the use of SGD commands.