User manual

Designing Labels

Designing an RFID Smart Label

13857L-003 11/29/2011

6. Type in the value you want to encode into this block. Repeat the process for other blocks.

7. Click on the OK button. A schematic view of the RFID Tag antenna will open in the label

background identifying the definition of the RFID data on the label.

8. You can continue designing the smart label with non-RFID data as described in the

previous sections.

Figure 35 • RFID Tag antenna in the background

When you print the label, the RFID data will be sent to the printer. The printer prints the RFID

smart label and programs the RFID tag embedded into the label at the same.

Note • The labeling software can work with Unique RFID Tag numbers. Each RFID tag has

embedded a unique serial number. Some printers can read the Unique RFID Tag number and it

can be used on the label linked with some label objects.