User manual

Designing Labels

Designing a Basic Label

13857L-003 11/29/2011

Use Drawing Tools

Now you will insert a line to separate a text object from other objects and a rectangle around

the picture object.

1. From the Toolbox, select the button and move the cursor to the

required starting point of the line.

2. While drawing the line, press and hold down the mouse button. Move the mouse to the

end position of the line and release the button. The Line object is placed on the label.

3. In the Toolbox, click the button and point the mouse to the

upper left corner of the picture.

4. While you stretch the rectangle to the lower right corner of the picture, click and hold the

mouse button.

5. To change the thickness of the vertical and horizontal line, double-click on the rectangle

object to open its properties. Select the thickness you want and click the

Finish button.

6. To edit the drawing object, double-click on the line or rectangle to open the dialog box

with its properties.

The label should show the following:

Figure 26 • Label with fixed objects