User manual

35
Setting Up ZebraDesigner Software
User Interface
11/29/2011 13857L-003
Font Downloader
This command starts the Zebra Font Downloader, which is used to download fonts to the
printer’s internal memory. Downloaded fonts perform in the same way as internal printer
fonts, optimizing printing by reducing the amount of needed communication sent to the
printer.
It is also possible to access the Zebra Font Downloader by clicking the
Start Menu > Programs
> Zebra Technologies > Zebra Font Downloader > Zebra Font Downloader
If this option is not available in ZebraDesigner, Zebra Font Downloader is not installed. The
installation of the Zebra Font Downloader is available with the installation of printer drivers.
Window Menu
Cascade
Use this command to cascade all open windows.
Note • Make sure all the windows you want to display are open. Minimized windows cannot
be displayed.
Tile
Use this command to tile all open windows in working space.
Note • Make sure all the windows you want to display are open. Minimized windows cannot
be displayed.
Arrange Icons
Use this command to arrange icons (minimized windows) in working space - to the bottom of
it. This has effect only if icons are not already arranged.
Close All
This command closes all open windows (documents) with prompting for all unsaved
documents. Use it to quickly close all windows with one command (otherwise you have to use
Close command in File menu for each window).
Window List
When one or more windows (documents) are open, they are all listed. You can quickly switch
between windows by selecting an appropriate one. If more than nine windows are opened,
more are accessible by choosing option
More windows…