User manual

Setting Up ZebraDesigner Software
User Interface
32
13857L-003 11/29/2011
Rectangle
After selecting the Rectangle command in the Object menu or clicking the
button in the
Toolbox, the cursor with the rectangle symbol
appears.
Thickness: Defines the width of the object borders.
Note • The valid values for thickness depend on the printer being used on the label. Not all
values are acceptable for all printers.
Print as Graphics: This option lets you print the object as an internal printer element, or as
graphic elements.
Note • Printing will be faster if you do not check this option. However, if you have selected
some line or fill style options that your printer does not natively support, the printing will be
auto-set to
Print as Graphics and you will not be able to disable it.
Rounded Rectangle: With this option you can define rounded corners of the rectangle. You
can select thickness and radius for the object.
Line
After you select the Line command in the Object menu or click the
button in the
Toolbox, the cursor with the line symbol appears.
Use this command to draw lines on the label.
Ellipse
After you select the Ellipse command in the Object menu or click the
button in the
Toolbox, the cursor with the ellipse symbol appears.
Thickness: Defines the width of the object borders.
Note • The valid values for thickness depend on the printer being used on the label. Not all
values are acceptable for all printers.
Print as Graphics: The option lets you print the object as an internal printer element, or as
graphics element.
Note • Printing will be faster if you do not tick this option. However if you have selected some
line or fill style options that your printer does not natively support, the printing will be auto-set
to
Print as Graphics and you will not be able to disable it.
Inverse
After you select the Inverse command in the Object menu or click the
button in the
Toolbox, the cursor with the inverse symbol appears.
Adds an inverted box to the label. The inverted box turns inverses the color of all underlying
objects.
Note • The Inverse command is not available for all printers. If the printer does not support
Inverse functionally internally, the command cannot be selected.