User manual

29
Setting Up ZebraDesigner Software
User Interface
11/29/2011 13857L-003
Zoom Out
Zoom out command shows a wider view of the label. The - (Minus) key on the numeric
keypad can also be used. Each time
Zoom out is selected, the displayed picture becomes 10%
smaller.
Zoom
When using the Zoom command, you can define the optional zoom factor you need. You can
choose any zoom factor from 5 to 3000.
Figure 5 • Zoom dialog box
In the Zoom dialog box you can select the different ways of zoom.
Snap to Grid
Selecting this option enables the positioning of the objects to be based on the grid settings.
When you move the objects, they are placed on a grid position. De-selecting this option allows
elements to be freely moved on the label.
The upper left corner of the object is used for starting point of the grid.
Grid size cannot be modified.
Display Grid
Selecting this option makes the grid visible on the label. De-selecting the option hides the grid.
Factor You can define your own factor of zoom (in %).
100% The size of the document on screen will be the same as the size of the
document on the label.
To page You will see the entire page on the screen.
To label You will see the entire label on the screen.
To objects You will see all the objects on the screen.