User manual

Setting Up ZebraDesigner Software
User Interface
20
13857L-003 11/29/2011
Save
This command saves the active document in the current label file. If no file name has been
defined yet, you will enter the Save As dialog box.
The
Save command can also be accessed directly by click the button.
Save As
Select this command when you want to name a new label or when you want to copy an
existing label under the new name or to another folder or drive.
The default folder to save the labels is
My Label in My Documents. When you need to save the
label to a different folder or drive, you can use Windows browse function to define the target
folder.
Export to Printer
Export the label to the printer so it is available for stand-alone printing.
Label Setup
Should you want to change the label parameters, such as dimensions or print orientation, use
the
Label setup command from the File menu or double click the label. The Label Setup
Wizard dialog is shown.
Install Printer
Select this command when you want to run the printer installation wizard. After completing
the wizard, the printer becomes available, and ZebraDesigner does not need to be restarted.
Remove Printer
Select this command when you want to remove one of your installed printers.
The printers that are currently used by the application are shown as disabled and cannot be
removed. The removal of the printer does not require a restart of the application.
Printer Settings
Specific printer settings are set here. The shortcut to this dialog is to double click the printer
name in a status bar in the bottom of the working window.
Note that all printer settings are saved with the label and are restored every time the label is
opened. Each label will store its own custom printer settings. In case you want to print the
label with a different printer, the other printer will have to be setup again to suit your needs.
When changing the printer associated with the label, every custom setting is lost and have to
be re-configured.
When you change the printer associated with the label or when you create a new label, the
default printer settings are used. These default settings can be set for each printer in
Control
Panel
.