User manual

Designing Labels
Using Toolbars
120
13857L-003 11/29/2011
Aligning Objects
First you have to select objects that you want to align.
Note • All objects are aligned relative to the first selected object.
Then click appropriate buttons in the Design toolbar to align selected objects to each other. If
Align toolbar is not visible (by default it is located on the very right side of the window),
enable the Design toolbar in the Toolbar option in the
View menu.
You can align objects to:
You can also distribute objects evenly, so that spacing between them is equal:
Note • If you hold the CTRL key while clicking the buttons, the selected objects are aligned
relative to the label and not to the first selected object.
Resize Objects
To resize the object on the label, do the following:
1. Select the object.
The selected object is framed with a rectangle.
2. Click on one of the small rectangles in the corners of the rectangle.
3. Hold the mouse key down.
4. Move the position of the cursor on the screen.
The object will resize with the cursor.
Left
Right
Horizontal center
Top
Bottom
Vertical center
Horizontally
Vertically