Datasheet

Accessories
Universal Roll Holder – P1014125
70
P1016701-001 Rev. B KR403 Hardware Integrator Guide 9/24/2010
Universal Roll Holder – P1014125
This roll holder can be fitted on the right or left side of the printer. The arm can be set at
three different angles. This makes make integration in the kiosk easy.
• 58 mm, 60 mm, 80 mm, and 82.5 mm media widths can be used without
adjustments.
• The universal roll holder supports up to Ø200 mm rolls in the ‘high’ and ‘low’ arm
positions, and Ø250 mm rolls in the ‘under’ position with clearance for cabling.
• No other accessories are required for the ‘high’ arm position, while the Printer
Mounting Plate with the inertia dampening spring guide and cable shield is
needed in the two other positions.
• The optional media roll low sensor can be added to the roll support.
Mounts on
either side
Æ200 mm Roll
and ‘Low’ Roll
Support
Position Shown
High and Low - 150 mm max.roll
Under 200 mm max.roll
Arm Positions
High and Low - 200 mm max.roll
Under - 250 mm max.roll
Arm Positions