Datasheet
Table Of Contents
- Introduction
- Design Overview
- Printer Overview
- Basic Printer Dimensions
- Printer Orientation
- Printer Features
- General Printing Information
- Basic Printer Mounting (printer only)
- Design Your Own Mounting
- Print Modes
- Looping Presenter (Kiosk Mode)
- Vertical Presenter (Kiosk Mode)
- Receipt (Page) Imaging Modes
- Controls, Indicators, and Sensors
- Sensing, Status and Error Reporting
- Feed Button Modes
- Printer Configuration Methods and Tools
- Fonts and Your Printer
- Connections
- Media
- Accessories
- Accessories Overview
- Nozzle Bezel – P1011185
- Shutter Bezel – 104591
- Small Core Media Adapter – G105156
- Quick-Fit Hubs – 103939
- Quick Fit Leaf Spring Retainer – 01473-000
- Roll Support – P1014124
- Media Roll Low Sensor
- Universal Roll Holder – P1014125
- Printer Mounting Plate – 104208
- Wall Mount Roll Holder – P1014123
- Printer Power Supply – 808099-004
- Universal Serial Bus (USB) Cable – P1027715
- Large Media Roll Adapter – P1026858
- Mounting Plate for Large Media Roll Adapter – P1027728
- Using other Accessories with the Large Media Roll Adapter
- Routing Cables with the Large Media Roll Adapter
- Troubleshooting

9/24/2010 KR403 Hardware Integrator Guide P1016701-001 Rev. B
6
Accessories
Accessories Overview
The KR403 printer has a wide range of accessories designed and tested to work with your
printer. The accessories can be used by themselves, combined with other printer
accessories, or as part of your own unique printer integration design. At the time of this
guides release, the following accessories are available for your printer:
• Nozzle Bezel — A translucent media exit bezel styled after common credit card
input bezels used in ATM (Asynchronous Transfer Mode) machines and other
kiosks.
• Shutter Bezel — The shutter bezel is a light weight door designed to prevent the
kiosk user from easily inserting foreign objects into the printer, dust, or block
external light sources from interfering with the printer’s ability to detect when is
media exiting the printer.
• Small Core Media Roll Adapter — Designed to guide the leading edge of receipt
into the input of the media present rollers. Allows the use of media roll inside
diameters less than 25 mm (typically POS media) and increases the operational
range of printer in a given mounting orientation (see "Mounting Orientations" on
page 48).
• Quick-Fit Printer Mounting — A quick printer release mounting system that can be
used with KR403 mounting accessories or with your own design. The service tech
can pull the leaf spring (latch) to unlock the printer and quickly slide it out for easy
replacement or service. the parts can be ordered separately as:
• Quick-Fit Hubs — Flanged hubs and printer mounting screws
• Leaf Spring Retainer — Spring and two M3 x 3 mm screws
• Roll Support — A rugged media roll support bracket designed to provide minimal
friction and self centering of the media roll.