Datasheet

Table Of Contents
57
Media
Manual Media Loading
9/24/2010 KR403 Hardware Integrator Guide P1016701-001 Rev. B
Manual Media Loading
Manual media loading is intended for maintenance operations, such as printhead cleaning
and removing media jams. Please use the Auto Load procedure (page 56) to load media
for normal operations.
1. Open the printhead.
2. Insert the media through the front of the printer and under the open printhead. Pull the
media just past the cutter and platen (drive) roller.
3. Close the printhead. Push down on the push-bar to securely latch the printhead
closed.
4. Press the Feed button once to get the printer out of Pause mode (double blinking
green status indicator. The printer will feed 70 mm of media and cut the media.
Discard the receipt scrap.
Pressing the Feed once more will reprint that image to the proper paper size.
Figure 5-28 • Manual Media Loading