Datasheet
Table Of Contents
- Introduction
- Design Overview
- Printer Overview
- Basic Printer Dimensions
- Printer Orientation
- Printer Features
- General Printing Information
- Basic Printer Mounting (printer only)
- Design Your Own Mounting
- Print Modes
- Looping Presenter (Kiosk Mode)
- Vertical Presenter (Kiosk Mode)
- Receipt (Page) Imaging Modes
- Controls, Indicators, and Sensors
- Sensing, Status and Error Reporting
- Feed Button Modes
- Printer Configuration Methods and Tools
- Fonts and Your Printer
- Connections
- Media
- Accessories
- Accessories Overview
- Nozzle Bezel – P1011185
- Shutter Bezel – 104591
- Small Core Media Adapter – G105156
- Quick-Fit Hubs – 103939
- Quick Fit Leaf Spring Retainer – 01473-000
- Roll Support – P1014124
- Media Roll Low Sensor
- Universal Roll Holder – P1014125
- Printer Mounting Plate – 104208
- Wall Mount Roll Holder – P1014123
- Printer Power Supply – 808099-004
- Universal Serial Bus (USB) Cable – P1027715
- Large Media Roll Adapter – P1026858
- Mounting Plate for Large Media Roll Adapter – P1027728
- Using other Accessories with the Large Media Roll Adapter
- Routing Cables with the Large Media Roll Adapter
- Troubleshooting
Media
Basic Media Mounting Considerations
48
P1016701-001 Rev. B KR403 Hardware Integrator Guide 9/24/2010
Mounting Orientations
The printer has two basic kiosk operation modes and orientations: Horizontal and Vertical.
The maximum angle that the printer can operate from the nominal vertical or horizontal
orientations is dependent upon environmental conditions and the media in use.
• Environmental conditions that can affect operation include: humidity (and
temperature), circulating air in the kiosk, static buildup on adjacent kiosk components
and surfaces, etc.
• Media considerations can include: length of receipt, partial cut of receipt in receipt
design, media curving at the end of the media roll, media thickness and weight,
perforations on fan-fold or receipt media, etc.
• Other considerations that affect your printer mounting are also in this section include:
media mounting, media path, media access, printer maintenance, cabling, etc.
Figure 5-20 • Mounting Orientations
Acceptable Verify Operation Unacceptable
VerticalHorizontal
Horizontal
Vertical