User manual

Maintenance

Replacing the Printhead

4/1/09 LP 2824 Plus™ User Guide 980644-001 Rev. A

5. Verify that the printhead moves up and down freely when pressure is applied and remains

locked when released.

6. Clean the printhead. Use a new pen to wipe body oils (finger prints) and debris off the

printhead. Clean from the center of the printhead to the outside. See Cleaning the

Printhead on page 57.

7. Reload media. Plug in the power cord, turn on the printer and print a status report to

ensure proper function. See Printing a Test (Printer Configuration) Label on page 18.