Manualshelf

User manual

ManualsBrandsZEBRA ManualsPrintersTLP 2824 Plus Label printer Thermal transfer 203 x 203 dpi Max. label width: 60 mm USB, LAN
41424344454647484950
Print Operations
Printing on Fan-Fold Media
32
980644-001 Rev. A LP 2824 Plus™ User Guide 4/1/09
Printing on Fan-Fold Media
Printing on fan-fold media requires you to adjust the media guide’s stop position.
1. Open the top cover.
2. Open the hangers to their widest position.
3. Snap the holder-open lock towards the front of the printer.
4. With a sample of your media, adjust the guides to the width of the media. The guides
should just touch, but not restrict, the edges of the media.
5. Insert the media through the slot at the rear of the printer.
6. Run the media between the hangers and guides.
7. Close the top cover.