Operation Manual

Getting Started 4 - 9
Figure 4-12 Deleting a Bar Code in Batch Mode
Pairing the CS4070
1. Press the scan button (+) to wake the scanner.
2. Press and hold the Bluetooth button for five seconds. The scanner beeps and the Bluetooth button blinks
quickly to indicate that the scanner is discoverable by the host.
3. On the ET5X, swipe in from the right edge of the screen.
4. Touch Settings > Change PC settings.
5. In the navigation panel, touch PC and devices > Bluetooth.
6. If Bluetooth is not enabled, swipe to enable it. The CS4070 appears in the Devices list, indicated by its model
name.
7. Select the CS4070 from the list.
8. Touch Pair. A window prompts for a PIN generated by the ET5X.
NOTE Bar codes cannot be deleted in Bluetooth mode.