Operation Manual

Wireless 3 - 3
Figure 3-1 Available Networks
4. Touch the network to connect.
5. Touch the Connect automatically checkbox to allow the ET5 to connect automatically to this network
whenever the device is on.
6. Touch Connect.
7. If required, enter security key and then touch Next.
8. Touch Yes to find PCs and devices on the network or No to not find these devices. Once connected,
Connected appears under the network name.
View Network Information
To view security, address, and other information about the connected Wi-Fi network:
1. Swipe in from the right edge of the screen.
2. Touch Settings > Change PC settings.
3. In the navigation panel, touch Network > Connections.
4. In the Wi-Fi section, touch the network name to view the information.