Operation Manual

Getting Started 1 - 9
Figure 1-12 Close Access Door
Charging the ET5X
Use the Communication and Charging Cradle, Rugged Communication and Charging Cradle or Charge Only
Cradle to charge the ET5X.
Figure 1-13 ET5X Cradles
1. If using the Communication and Charging Cradle, open the bottom access door and hold it to the back of the
tablet.
2. Align the ET5X with the alignment pins on the cradle.
3. Insert the ET5X into the cradle. Note that the Communication and Charging Cradles contains a locking
mechanism that locks the ET5X to the cradle.
NOTE The Charge Only Cradle (CRD-ET5X-1SCG1) and the Communication and Charging Cradle
(CRD-ET5X-1SCOM1) come with two inserts; tall insert and short insert. Install the tall insert when using
an ET5X without a Rugged Frame or Expansion Back. Install the small insert when using an ET5X with an
Expansion Back and without a Rugged Frame. Do not install either insert when using the ET5X with the
Rugged Frame.
The Rugged Communication and Charging Cradle (CRD-ET5X-1SCOM1R) does not come with inserts.
Use with ET5X and Rugged Frame with IO Adapter.
Communication and Charging CradleCharge Only Cradle
Short Insert
Rugged Communication and Charging
Cradle
Tall Insert