Quick Reference Guide

8 ET51/56 Enterprise Tablet
Setup the Charge Only Cradle or Communication Cradle. Power supply
(PWR-BGA12V50W0WW), DC Line Cord (CBL-DC-388A1-01) and country-specific AC line
cord, sold separately.
1. If using the Communication and Charging Cradles, open the bottom access door and hold it
to the back of the tablet.
2. Align the device with the alignment pins on the cradle.
3. Insert the device into the cradle. Note that the Communication Cradle contains a locking
mechanism that locks the device to the cradle.
4. The charging LED indicates charging.
5. To remove the device from the Charge Only cradle, hold the cradle down with one hand and
lift the device.
To remove the device from either Communication Cradle, press the release button on the
right side of the cradle and lift the device. Use thumb to hold down the cradle.
Communication and Charging
Cradle
Charge Only Cradle
Cradle Insert
Required
Cradle Insert
Not Required
Rugged Communication and
Charging Cradle
Cradle Insert
Not Required
MN-003332-04ENa_et51-56-qsg-en.fm Page 8