Quick Reference Guide

Quick Reference Guide 7
CAUTION: Be aware of the orientation of the battery cover. Failure to replace the
battery cover properly may damage the battery cover.
10. Align the tabs on the underside of the cover with the slot around the battery well. Make
sure that the notch on the battery cover is at the bottom left cover of the device.
11. Carefully press down around the edge of the cover. Make sure that the cover is seated
properly.
12. Press Power button to turn on the device.
Charging the Device
Use the Communication and Charging Cradle, Rugged Communication and Charging
Cradle or Charge Only Cradle to charge the device. See ET51/56 User Guide for more
information.
NOTE: The Charge Only Cradle (CRD-ET5X-1SCG1) and the Communication and
Charge Cradle (CRD-ET5X-1SCOM1) come with two inserts; tall insert and short
insert. Install the tall insert when using a device without a Rugged Frame and
Expansion Back. Install the small insert when using a device with an Expansion Back
and without a Rugged Frame. Do not install either insert when using the device with
the Rugged Frame.
The Rugged Communication and Charge Cradle (CRD-ET5X-1SCOM1R) does not
come with inserts. Use with device and Rugged Frame with IO Adapter.