User Manual
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Accessories
72
Figure 68 Plug Power Supply into Input Power Port
Charge batteries in ambient temperatures from 0°C to +60°C (32°F to 140°F) as reported by the battery.
Charging is intelligently controlled by the charger. To accomplish this, for small periods of time, the charger
alternately enables and disables battery charging to keep the battery at acceptable temperatures.
The 8.4" main battery charges from fully depleted to 90% in approximately 2 hours and from fully depleted to
100% in approximately 3 hours.
NOTE: The Charging indicator only illuminates when the device is connected to AC power.