User Manual

Data Capture
48
Figure 31 SE4750 Expansion Back Aiming Pattern
Release the Scan button. The bar code data displays on the screen.
Scanning with RS507/RS507X Hands-Free Imager
To read a barcode, a scan-enabled app is required.
To scan with the RS507/RS507X:
1. Pair the RS507/RS507X with the device. See Pairing Bluetooth Scanners
for more information.
2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
3. Point the RS507/RS507X at a barcode.
Figure 32 Barcode Scanning with RS507/RS507X
4. Press and hold the trigger.
The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed by
the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.
The RS507/RS507X LEDs light green and a beep sounds to indicate the barcode was decoded
successfully. When the RS507/RS507X is in Pick List mode, the RS507/RS507X does not decode the
barcode until the center of the crosshair touches the barcode.