User Manual
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Getting Started
18
Figure 8 Aligning the Battery Cover
5. Carefully press down around the edge of the cover. Make sure that the cover is seated properly.
Figure 9 Pressing Down on the Battery Cover
6. Press Power button to turn on the device.
Charging the Battery
Use one of the cradles to charge the main battery installed in the device. See the chapter Accessories for
charging accessories. See Battery Status and Battery Management for additional details.
The 8.4” tablet main battery charges from fully depleted to 90% in approximately 2 hours and from fully
depleted to 100% in approximately 3 hours.
The Charging indicator only illuminates when the tablet is connected to AC power.
Turning Off the Device or Display
To turn off the device:
1. Touch Power > Update and shutdown.