User Manual
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Data Capture
53
4. After the scanner reboots, scan the barcode below to place the scanner in HID or SPP mode.
Figure 45 DS3678 Bluetooth HID Classic Barcode
Figure 46 DS3678 Bluetooth SPP Classic Barcode
Pair the Device with the Scanner
To pair the tablet with a Bluetooth Scanner:
1. In the taskbar, touch the Action Center icon.
2. Touch All Settings, then touch Devices > Bluetooth.
3. Slide the control to the right to turn it on.
4. Touch the plus sign to select Add Bluetooth or other device then in the Add a Device window, touch
Bluetooth.
5. Discoverable Bluetooth devices populate the window.