User Manual
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Accessories
73
Power Pack
The optional Power Pack provides additional power for charging the main battery.
Figure 69 Power Pack
1. Install one of the optional Expansion Backs. See ET51 Integrator Guide for more information.
2. Press the two release buttons on the side of the Expansion Back. The dummy battery insert ejects slightly.
Figure 70 Remove Dummy Battery Insert
3. Remove dummy battery insert.
4. Insert Power Pack into slot until it snaps into place.
Figure 71 Install Power Pack
Charge Level Indicators
Charge Indicator Button
Power Output Contacts
Release Button (2)