User Manual
Table Of Contents
- Copyright
- Terms of Use
- Revision History
- About This Guide
- Getting Started
- Using the Tablet
- Wireless
- Data Capture
- Expansion Back
- RS507/RS507X Hands-Free Imager
- RS6000 Bluetooth Ring Scanner
- DS3678 Digital Scanner
- Imaging
- Scanning Considerations
- Scanning with the SE4710 Expansion Back
- Scanning with SE4750 Expansion Back
- Scanning with RS507/RS507X Hands-Free Imager
- Scanning with RS6000 Bluetooth Ring Scanner
- Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner
- Pairing Bluetooth Scanners
- Connecting a USB Scanner
- Accessories
- Maintenance and Troubleshooting
- Specifications
- Index
Accessories
58
Charge Only Cradle
CAUTION: Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines.
NOTE: The Charge Only Cradle (CRD-ET5X-1SCG1) comes with two inserts; tall insert and short insert. Install the tall insert
when using a device without a Rugged Frame or Expansion Back. Install the small insert when using with an Expansion Back
and without a Rugged Frame.
This section describes how to use a Charge Only Cradle with the device.
The Charge Only Cradle:
• Provides power for operating the device.
• Charges the device’s battery
and optional Power Pack installed in an Expansion Back
.
Figure 48 Charge Only Cradle - Front View
Figure 49 Charge Only Cradle - Rear View
Installing the Insert
Install the tall insert when using a device without a Rugged Frame or Expansion Back. Install the small insert
when using an device with an Expansion Back and without a Rugged Frame.
1. Align the insert over the pins.
Charging PinsGuide Pins Small Insert Tall Insert
Power Input