Spec Sheet
PAGE 2
SPECIFICATION SHEET
ET50/55 ENTERPRISE TABLET
An unmatched accessory family
...FOR A NEW LEVEL OF FLEXIBILITY
Consumer tablets are not built for business, and don’t oer the wide range of accessories you need to provide your workers with the right features
and your IT department with easy backroom management. The ET50/ET55 Enterprise Tablets address this gap by providing a comprehensive line
of accessories that allow you to tailor data capture features, rugged specifications and power management for your workforce, while providing
your IT team with all the accessories they need for easy backroom management and ecient use of backroom space.
Increase the drop specification
with our rugged frames
Just add our rugged frame to either the 8.3 in.
or 10.1 in. ET50 or ET55 to nearly double the
drop specification — ideal for delivery drivers,
service technicians and other workers outside
the four walls, as well as workers in outdoor
areas in warehouses and do-it-yourself and
garden stores. The standard drop specification
is 3.2 ft./1 m to concrete. With the rugged frame,
the drop specification increases to 6 ft./1.8 m.
Innovative expansion back for the
ultimate in scanning, power management
and peripheral flexibility
The integrated 8 MP camera in the ET50/ET55
is great for occasional bar code, document
and photo capture. But when workers need
more intensive data capture, our unique
expansion back delivers. Just swap the main
battery cover for the expansion back to add
enterprise-class data capture to your tablets.
The expansion back simply screws into place
and can be ordered with your choice of two of
our most advanced scan engines, the SE4750
and the SE4710, plus a rotating handstrap, or
the handstrap alone. Both options are available
in both tablet sizes. Two convenient scanning
triggers on either side of the scan engine
enable easy one-handed scanning with either
hand. Screw points on the rugged frame allow
you to add the accessories you need to create
the perfect tablet solution for your business,
from a mobile POS module to a shoulder strap.
And the optional battery can be added to any
expansion back.
Get perpetual power with an optional battery
When you add an optional battery via the
expansion back, you never need to take the
tablet out of service to replenish power. This
auxiliary battery provides additional power
while also charging the ET50/ET55 internal
battery. Unlike the internal battery, the
optional battery is hot swappable — users can
simply swap the optional battery on the fly
if power is running low. With 6800 mAh, the
optional battery oers more power than the
8.3 in. tablet’s 5900 mAh battery, allowing
you to virtually double the available power
and cycle times. And the optional battery can
be charged in the vehicle through the USB
charging connector or in the backroom in
the connectable 4-slot optional battery
chargers. The result? Your ET50/ET55
Enterprise Tablets can remain in the hands of
your workforce every hour of every workday,
maximizing the value of this investment.
More scanning options
While you can connect any Bluetooth-enabled
scanner to the ET50/55. Zebra provides
two additional enterprise-class scanning
options. The standalone Bluetooth CS4070
is a pocket-sized wireless scanner that
oers unparalleled scanning performance
on any bar code on any surface — printed or
electronic. The unique and lightweight RS507
ring scanner provides hands-free scanning
— ideal for retail workers or delivery drivers
who need to take inventory.
Carrying solutions
Our flexible operations case allows workers
to easily switch between three “wearable”
options to bring comfort to any job: as a
holster worn on a belt, an-over-the-shoulder
strap or a cross-body strap.
Docking and charging options for
backroom operations and your workers
Our unique ShareCradles allow you to utilize
the same cradle to charge the ET50/ET55 and
other Zebra mobile devices — an accessory
strategy designed to reduce your accessory
costs. ShareCradles are available in multi-slot
charge only and multi-slot Ethernet and can be
connected and mounted to maximize backroom
space. Users can charge their individual tablet
with a standard USB charging cable or a rugged
charge cable that breaks away when yanked,
protecting tablet lifecycle. A vehicle mount
cradle is ideal for service technicians, delivery
drivers and salespeople who spend their days
out on the road, while a forklift mount is ideal
for warehouse workers. And a variety of single-
slot docks include a charge only dock, as well
as a dock that provides three USB 3.0 ports,
Ethernet connectivity and an HDMI port for
maximum peripheral connectivity. Docks are
available in two styles — standard and rugged,
which accommodates the tablet in its rugged
frame. (Note: vehicle docks are only available in
the rugged style.)