Operation Manual

Connect the USB/Charge Cable cup to the bottom of the ET1. Align the ends of the cup with the alignment marks on
the ET1.
When the ET1 is connected to a host computer using the USB/Charge cable, the ET1 appears as a Portable Device on
the host computer.
Using the Host USB Module
The USB Host Module provides USB Host connection to a peripheral.
Procedure:
1 Lift the connector plug on the USB Host Module.
2 Connect the microUSB connector to the USB Host Module.
Figure 56: USB Host Module Connection
3 Connect the USB/Charge Cable cup to the bottom of the ET1. Align the ends of the cup with the alignment marks
on the ET1.
When the ET1 is connected to a host computer using the USB/Charge cable, the ET1 appears as a Removable
Disk on the host computer.
86 | Accessories
February 2015 | MN000022A02-A