Operation Manual

3
Touch the options bar and touch .
Figure 44: Video Mode
4
Touch
to switch between the front or rear cameras.
5
Touch
to adjust exposure, flash, and other settings using the video settings. See Video Settings on page 70
for more information.
6
Touch and to adjust the zoom level.
7 Point the camera and frame the scene.
8
Touch to start recording.
The ET1 starts recording the video. The video time remaining appears in the top left of the screen.
9
Touch to end recording.
Note: Previously recorded video displays in the thumbnail at the top right.
10 Touch the thumbnail to access the Gallery application. See Viewing Photos and Videos on page 71.
Camera Settings
When in Camera mode, Camera settings are displayed on screen. Touch for the settings to change.
Rear-facing Camera Settings
Touch
to display the camera setting options.
•
Camera Settings - Touch to open a scrolling list of settings:
- Store location - Include location information with each photo using the ET1 global positioning system (GPS).
Options: On or Off (default).
- Focus Mode - Set the focus mode of the camera. Options: Macro, Infinity, Continuous, or Auto (default).
- Capture mode - Set the image capture mode. Options: High Quality (default) or Zero Shutter Mode.
- Picture size - Touch to set the size (in pixels) of the photo. Options: QVGA, VGA, 1M Pixels, 1.3M Pixels,
2M pixels, 3M pixels, 5M pixels, or 8M pixels (default).
- ISO - Set how sensitive the camera is to light. Options: 800, 400, 200, 100, or Auto (default).
- Picture quality - Options: Super fine (default), Fine or Normal.
- Restore defaults - Touch Restore defaults to restore all camera settings to the default values.
Photos and Videos | 69
MN000022A02-A | February 2015