Operation Manual

Figure 41: Bluetooth Pairing — Simple Pairing
8 Enter a PIN in the text box and touch OK.
9 Enter the same PIN on the other device. Touch Pair.
10 The Bluetooth device is added to the PAIRED DEVICES list and a trusted (“paired”) connection is established.
Changing the Bluetooth Name
By default, the ET1 has a generic Bluetooth name that is visible to other devices when connected.
To change the Bluetooth name:
Procedure:
1
Touch
.
2
Touch Bluetooth.
3 If Bluetooth is not on, slide the switch to the ON position.
4 Touch .
5 Touch Rename device. The Rename device dialog box appears.
6 Enter a name and touch Done.
7
Touch .
Connecting to a Bluetooth Device
Once paired, connect to a Bluetooth device:
Procedure:
1
Touch .
2
Touch
Bluetooth.
3 If Bluetooth is not on, slide the switch to the ON position.
4 In the PAIRED DEVICES list, touch and hold on an unconnected Bluetooth device until a menu appears.
5 Touch Connect. When connected, the device is displayed as connected in the list.
64 | Bluetooth
February 2015 | MN000022A02-A