Operation Manual

3
Touch .
Disabling Bluetooth
Procedure:
1
Touch
.
2 Slide the Bluetooth switch to the OFF position.
3
Touch .
Discovering Bluetooth Devices
The ET1 can receive information from discovered devices without pairing. However, once paired, the ET1 and a
paired device exchange information automatically when the Bluetooth radio is on. To find Bluetooth devices in the
area:
Procedure:
1 Ensure that Bluetooth is enabled on both devices.
2 Ensure that the Bluetooth device to discover is in discoverable mode.
3 Ensure that the two devices are within 10 meters (32.8 ft.) of one another.
4
Touch .
5
Touch
Bluetooth.
6 Touch SCAN FOR DEVICES. The ET1 begins searching for discoverable Bluetooth devices in the area and
displays them under AVAILABLE DEVICES.
7 Scroll through the list and select a device. The Bluetooth pairing request dialog box appears.
Figure 40: Bluetooth Pairing - Enter PIN
Bluetooth | 63
MN000022A02-A | February 2015