Operation Manual

Enabling DataWedge
To enable DataWedge:
Procedure:
1
Touch
.
2
Touch
. The DataWedge Profiles window appears.
3 Touch .
4 Touch Settings.
5 Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that DataWedge
is enabled.
6
Touch .
Disabling DataWedge
To disable DataWedge:
Procedure:
1
Touch
.
2
Touch . The DataWedge Profiles window appears.
3 Touch .
4 Touch Settings.
5 Touch the DataWedge enabled checkbox. The blue checkmark disappears from the checkbox indicating that
DataWedge is disabled.
6
Touch
.
DataWedge Configuration
To configure DataWedge see the ET1 Enterprise Tablet Integrator Guide.
Data Capture | 57
MN000022A02-A | February 2015