Operation Manual

Perform a hard reset if the ET1 stops responding. To perform a hard reset:
Procedure:
1 Simultaneously press the Power, Left Scan/Action and Right Scan/Action buttons.
2 The ET1 shuts down and then reboots.
Wake-up Settings
The wake-up conditions define what actions wake up the ET1 after it has gone into suspend mode. The ET1 can go
into suspend mode by either pressing the Power button or automatically by a time-out settings. Table 7: Wake-up
Default Settings on page 46 list the default wake up conditions.
Table 7: Wake-up Default Settings
Condition for Wake-up Power Button Automatic Time-out
AC power is applied. No Yes
ET1 is inserted into a cradle.
Yes Yes
ET1 is removed from a cradle. No No
ET1 is connected to a USB device. No Yes
ET1 is disconnected from a USB device. No Yes
Scan/Action button is pressed. Yes Yes
The screen is touched. No No
Bluetooth communication Yes Yes
Waking the ET1
If the ET1 is not used for a while, the screen dims and then darkens to conserve the battery.
The Lock screen displays. Touch and slide
up until it touch . If the Pattern screen unlock feature is enabled,
the Pattern screen appears instead of the Lock screen. See Un-Locking the Screen on page 42 for more information.
File Browser
Use the File Browser application to view and mange files on the ET1.
To open File Browser, touch > .
46 | Using the ET1
February 2015 | MN000022A02-A