Operation Manual

Figure 30: Multiple user Log In Screen
2 In the Password text field, enter the password.
3 Touch OK. After a resume from suspend, the user must enter the password.
Multiuser Logout
Procedure:
1 Drag the Status Bar down from the top of the screen.
2 Touch MultiUser is active.
3 Touch Logout.
4 The Login screen appears.
Resetting the Device
There are two reset functions, soft reset and hard reset.
Performing a Soft Reset
Perform a soft reset if applications stop responding.
Procedure:
1 Press and hold the Power button until the menu appears.
2 Touch Reset.
3 The device shuts down and then reboots.
4 The device reboots.
Performing a Hard Reset
Caution: Performing a hard reset with a SIM card installed in the ET1N2 may cause damage or data
corruption to the SIM card.
Using the ET1 | 45
MN000022A02-A | February 2015