Operation Manual

Icon Description
Secure Storage Administrator - Use to configure the Secure Storage feature. This icon
appears after the optional application is installed.
DWDemo - Provides a way to demonstrate the data capture features using the Camera,
Scanning Module or Magnetic Stripe Reader.
Switching Between Recent Applications
Procedure:
1
Touch and hold
. A screen appears with recently used applications.
Figure 25: Recently Used Applications
2
Touch an application to open it or press to return to the current screen.
3 Swipe an application up or down to remove from the list.
Un-Locking the Screen
Use the Lock screen to protect access to data on the ET1. Some email account require locking the screen. Refer to the
ET1 Enterprise Tablet Integrator Guide for information on setting up the locking feature. The Locking feature
functions differently in Single User mode or Multiple User mode.
Single User Mode
When locked, a pattern, PIN or password is required to unlock the device. Press the Power button to lock the screen.
The device also locks after a pre-defined time-out.
Press and release the Power button to wake the device.
42 | Using the ET1
February 2015 | MN000022A02-A