Operation Manual

Setting the Date and Time
The date and time are automatically synchronized using an NTP server when the ET1 is connected to a wireless
network. The user is only required to set the time zone. Refer to the ET1 Enterprise Tablet Integrator Guide for more
information on configuring the NTP server connection.
To set the date and time:
Procedure:
1
Touch .
2
Touch Date & time.
3 Touch Select time zone.
4 Touch the time zone for the current location.
5
Touch .
Display Setting
The Display settings screen allows the user to set the following options:
• Brightness
• Screen rotation
• Sleep time
• Font size
Setting the Screen Brightness
To set the screen brightness:
Procedure:
1
Touch
.
2
Touch
Display.
3 Touch Brightness.
Figure 14: Brightness Dialog Box
4 In the Brightness dialog box, check the Automatic brightness checkbox to set the ET1 to automatically adjust
the brightness using the built-in light sensor. Uncheck the checkbox to set the brightness manually. Use the slider
to set a brightness level.
5 Touch OK.
6
Touch .
Getting Started | 27
MN000022A02-A | February 2015