Operation Manual

13 Push the battery in until the battery release latch snaps into place.
14 Press the Power button to turn on the ET1.
Handstrap
Use the optional 360-degree rotatable handstrap to securely hold the ET1 while working. Refer to the ET1 Enterprise
Tablet Integrator Guide for information on installing the handstrap.
Rotate the handstrap for landscape or portrait viewing.
Figure 10: Rotate Handstrap 360 Degrees
Insert hand into the handstrap and tighten strap.
Figure 11: Hand in Handstrap
Battery Management
Note:
Prior to checking the battery charge level, remove the ET1 from any AC power source (cradle or cable).
24 | Getting Started
February 2015 | MN000022A02-A