Operation Manual

Verify the following items are in the box:
• ET1 Enterprise Tablet with 4 GB micro secure digital (SD) card installed
• Lithium-ion battery
• Quick Start Guide
• Regulatory Guide.
Inspect the equipment for damage. If any equipment is missing or damaged, contact the Zebra Customer Support
Center immediately. See Service Information on page 13 for contact information.
Setup
To start using the ET1 for the first time:
• Install SIM card in an ET1N2 with GSM (optional).
• Install the battery.
• Charge the ET1.
• Power on the ET1.
• Activate the ET1N2 on a mobile data network (optional).
Installing the SIM Card
Note: ET1N2 only.
The ET1N2 requires an activated SIM card. Obtain the card from a service provider.
Procedure:
1 Lift the access door.
Figure 3: Installing SIM Card
2 Insert SIM card into the SIM holder with the contacts facing down and the cut edge facing away from the holder.
3 Close the access door.
18 | Getting Started
February 2015 | MN000022A02-A