Operation Manual

Number Item Function
9 Back Button — Displays the previous screen. Closes the keyboard if the
on-screen keyboard is open.
10 P3 Launches the Search application (default). User configurable.
11 P2 Increases the volume (default). User configurable.
12 P1 Decreases the volume (default). User configurable.
13 Touch Screen Displays all information required to operate the ET1.
14 Camera Flash Provides illumination for rear-facing camera.
15 Rear-facing Cam-
era
Takes photos, videos, and captures bar code data.
16 USB Host Expan-
sion Module
Provides USB host connection to a peripheral.
Scanning Module Provides 1D and 2D bar code scanning.
Scanning/MSR
Module
Provides 1D and 2D bar code scanning and magnetic stripe card reading.
17 Power Button Press and hold to turn on the ET1. Press to turn on or off the screen. Press
and hold to select one of these options:
• Silent mode - The device is set to vibrate mode; all sounds are disa-
bled except for alarms.
• Airplane mode - Disable all wireless connections.
• Battery swap - Shut down the device when replacing the battery.
• Reset - Reboot the ET1 when software stops responding.
• Power off - Turn off the ET1.
18 Left Scan/Action
Button
Opens the scan application (default). Programmable.
19 Speakers Provides audio output for video and music playback.
20 HDMI Output
Connector
Provides HDMI audio and video signals to an HDMI compatible monitor
or television.
21 I/O Connector Provides power to the device from cradles and cables and provides USB
client and host communications.
22 Headset Jack Connects to mono headphones (3-wire, 2.5 mm plug).
23 Battery Provides operating power to the ET1.
24 Battery Latch Releases the battery for removal.
25 Side LED Indicates battery charge state.
26 Right Scan/Action
Button
Opens the scan application (default). Programmable.
Unpacking
Carefully remove all protective material from the ET1 and save the shipping container for later storage and shipping.
Getting Started | 17
MN000022A02-A | February 2015