User's Manual

OEPL1 Command - Set Line Mode
Description: This command is used to switch the printer op
-
erating mode from Page Mode (EPL2) to Line
Mode (EPL1 emulation).
LineModeconfigurationsettingisretainedafter
resethasbeenissuedorpowerhasbeencycled.
Syntax OEPL1
Example:
OEPL1¿
Returning to
Page Mode
The Line Mode command EPL2 can be sent to
the printer to return the printer to Page (EPL2)
Mode operation.
TheEPL2commandisprecededbyan ESCape
(27decor1Bh)characterandfollowedbyaline
feed (LF - 10 dec or 0A hex), a carriage return
(CR - 13 dec or 0D hex) or CR/LF.
Example:
¬EPL2¿
980352-001 Rev.A 3-75